Applications
Quick Start Frame Relay
Since the router
Upon initial start up, the router are
Within each of the remote site profiles automatically created Bridging, IP routing, and IPX routing are all set to “enabled”. Because each of these options are enabled by default and the automatically created remote site profiles will establish a PVC connection to the remote site routers, the router will bridge and IPX route data without any user configuration. Because an IP router requires an IP address, the router must be configured with an IP address before IP routing is fully operational.
To configure an IP address for the router, use the IP address option.
7 | IP Address | |
| ||
| Location: Main | |
| Ä Configuration | |
| Ä LAN | |
| Ä LAN IP | |
| Ä IP Address / mask size | |
| If security is required for the PVC connection refer to the Configure PPP Security section | |
| for information on setting the security passwords and user names for PPP. | |
| By default, PPP is disabled for each of the newly created remote site profiles. If PPP | |
| encapsulation is desired, for example to use security, the PPP encapsulation option | |
| should be set to “enabled”. By default, when PPP encapsulation is enabled multilink is | |
7 | also enabled. | |
PPP Encapsulation | ||
| ||
| Location: Main | |
| Ä Configuration | |
| Ä WAN | |
| Ä Remote Site | |
| Ä Edit Remote Site | |
| Ä Connection | |
| Ä PPP | |
| Enabled |
36