Black Box LW005A, LW012AE, LW011AE, LW008A manual Installing the Wireless Bridge LW004A or LW010A

3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES

4.4 Installing the Wireless Bridge (LW004A or LW010A)

The Wireless Bridge (LW004A or LW010A) is a plug- and-play installation. All you need to get up and running is to connect the power supply to the Bridge and to connect the Bridge directly to the Hub or to any available outlet of the Ethernet LAN.

You can make sure the Wireless Bridge is fully operational by checking the LED indicators as described in Step 5 on page 62.

To complete the installation process, you will need a 10BASE-T Ethernet cable with an RJ-45 connector at each end.

Step 1: Check to make sure the package contains the components you will need.

The package you received should contain the following components:

•Wireless Bridge (LW004A or LW010A)

•5-VDC power-supply transformer

•This User’s Manual

55