Black Box 34336, MD885AE-R2, MD885C-R2, MD885A-R3 user manual AT Profiles Screen

Modem 34336

C.3 AT PROFILES Screen

From the AT PROFILES screen you can select a Hayes mode configuration profile (either 0 or 1). Only part of the profile can be displayed at one time. The selected profile is used as the active configuration and is also designated as the default user profile.

•Press pushbutton 1 to select profile 0.

•Press pushbutton 2 to select profile 1.

•Press pushbutton 3 to toggle between profile 0 and profile 1 as the default. You can achieve the same effect by issuing the &Y command (&Y0 or &Y1).

Factory-default settings are shown below.

AT PROFILES

0 1 &Y0

ATbeflmqvxy AT&c

010210141 1

1 2 3

1 2 3

Move the	Move the	Exit to the
cursor one	cursor one
position to	position to	AT Profiles
the left	the right	Screen

The screen intially		TRANSMITTER			RECEIVER
displays the
	Move the		Increase			Move the
AT commands
and one	cursor to		the value of			cursor to
AT& command.	the previous		the blinking			the next
	section of		character			section of
	commands			by one		commands

ATbeflmqvxy AT&cdgjlpqrsx		s00	s18	s25	s26	AT\abcdeh kmnpq t vx
010210141	1210000000	001	000	005	001	3150101630323300100
AT Commands	AT& Commands		S Registers				AT\ Commands
							(most are for V.42 options)

Figure C-3. Selecting a Profile.

NOTE

Refer to Table 5-1, Hayes Compatible Commands, for an explanation of the commands represented in this diagram.

142