Black Box MD885AE-R2, MD885C-R2, MD885A-R3 Appendix C Summary Setup, Introduction to Summary Setup

APPENDIX C: Summary Setup

Appendix C: Summary Setup

C.1 Introduction to Summary Setup

Summary Setup is designed to allow experienced users to quickly change option settings for any mode. There are three Summary Setup screens: SETUPS, AT PROFILES, and S-REG. They are briefly described on the next page.

Because the screens show numerical codes with very little explanation, Summary Setup is recommended for experienced users only. Changes made through Summary Setup modify the active modem configuration and are saved to memory when you exit Summary Setup.

ACCESSING SUMMARY SETUP

Summary Setup is accessed from screen 6 of the SETUP menu. The SUMMARY screen includes a four-digit checksum value to the right of the word SUMMARY. This number changes if any of the option settings are changed. You can determine if any of the modem’s settings were changed, but you cannot determine what options were changed.

From the SUMMARY screen, choose SETUPS to change options, AT to change options that are associated AT commands, or S-REG to change S Register values. (See Figure C-1.)

KEY TO THE SUMMARY SETUP SCREENS

Each Summary Setup Screen is essentially the same: brief descriptive information on the top line and a long string of numbers on the bottom line.

The numbers are broken down into groups that represent a category of options (for example, EIA interface options).

Each digit position represents an option, and the number in each digit position indicates the current option setting (parameter). The diagrams in this appendix show the following information:

•Which options are included in each option group

•Which option is indicated by each digit position within the group

•The possible parameters for each option.

NOTE

The number in each digit position is the current iption setting (parameter). The diagrams of this Appendix show the factory-default setting for each option.

135