Chapter 3: Hardware Setup
3. Hardware Setup
NOTE: Figures
NOTE: To reset the settings to the default value, press the LES301A‘s reset button.
Figure
| Reset | ||
| 10/100 Mbps | ||
| button | ||
DC | port | ||
| |||
|
| DIN rail screw hole | |
|
| Wallmount screw hole |
DB9 male serial port
Figure
3.1LED Indicators 3.1.1 LAN LED
| Table |
|
|
Message | Description |
|
|
LED off | Ethernet is disconnected |
|
|
LED is blinking green | Data is transmitted at 100 Mbps on Ethernet |
|
|
LED is blinking orange | Data is transmitted at 10 Mbps on Ethernet |
|
|
Page 14 |
LES301A user manual