Black Box RS-422, RS-232, RS-485 user manual Software Setup, Page, 29. MS-DOS command prompt window

Chapter 4: Software Setup

Figure 4-29. MS-DOS command prompt window.

Step 2: Change to new IP via Telnet Port 1.

• Input “telnet 10.0.50.101 1”

NOTE: The Telnet will fail, and the LES301A will restart automatically. After restart, the IP address should change to 10.0.50.101.

Step 3: Use a new IP to configure LES301A via Telnet.

• Input “telnet 10.0.50.101”

NOTE: When using this method to change the IP address, the PC's IP address and the LES301A’s IP address must belong to the same subnet.

NOTE: The changed IP address must be legal, otherwise it will be changed back to the default value (10.0.50.100) after restart.

Figure 4-30. Assigning a new IP address by ARP command.

Page 36 724-746-5500 blackbox.com LES301A user manual