Chapter 4: Software Setup
2.Type in the old password in the “Old Password” field, type in the new password in the “New Password” and the “Verified Password” fields, and then click on “Save Configuration” to update the password.
NOTE: Press the default key to reset password to the default value.
3.COM type selection: Click on “COM1” Link and the following screen appears (see Figure
DOES THIS SCREEN EXIST FOR LES301A??
Figure
4.3.3 Network Setup
Click on the “Networking” link and the following screen appears. Fill in the IP information under the TCP/IP field. Or, you can configure the unit by clicking on DHCP to obtain auto IP address, gateway, and subnet mask information.
Enable SNMP by checking “Enable,” then fill in network identification information under SNMP field and click on the “Save Configuration” button to save the changes.
NOTE: The setting will not become effective until you restart the LES301A.
LES301A user manual | Page 29 | |
|
|