![Power:](/images/new-backgrounds/105111/10511135x1.webp)
Black Box Networks PICO systems
5.Fine Adjustment is required after the unit has been aligned with the internal pointing device. Fine alignment is applicable for vertical and horizontal orientations. These movements must be done using the fine alignment screws Adjust first the horizontal then the vertical screw
Pico Manual v5.1
Horizontal Fine
Alignment screws
as shown in the photographs on this page. Adjust these screws while watching the rear panel LED lights(see diagram:3.2). Illuminate as many green LED power indication lights as possible during the fine alignment process, and follow your multimeter display, to find the maximum of the detector voltage.
DON’T TRY TO DO MOVE TWO HEADS AT THE SAME TIME! The result won’t be the same
6.During this period described in the fifth step, try to avoid the saturation LED. /Red light/ (See Diagram 5.2)
Diagram 5.2
LED Meanings:
Power:
The head is powered up.
FO Link:
V5.118