Feet Assembly
Before installing the cooker, it is necessary to assemble the supplied feet. You can find them into the oven cavity.
1.Remove the hob pan supports, the burner caps and crowns and the oven accessories.
2.Carefully lean the cooker on its back (Fig. 1), paying attention not to cause any damage.
3.Adjust the feet height. A height indicator is printed on the last page of this Instruction book (Fig. 2). Lean the foot on the page and make the foot match with the indicator, then unscrew the bottom part of the foot, until you obtain the required height. Repeat the same operation with the other feet.
4.Screw the feet into the relevant holes indicated in figure 1.
5.Lift the cooker in vertical position. Replace the crowns, the burner caps, the hob pan supports and the oven accessories.
6.If necessary, adjust the cooker horizontal levelling by turning the bottom part of the feet, until the appliance is completely stable. (Fig. 3). A spirit level should be placed on a cake tray on one of the shelves to confirm that the appliance is correctly levelled.
Fig. 1 |
|
Fig. 2 | FO 2284 |
Fig. 3 | FO 2285 |
|
20
