Fitting the Stability Bracket
The stability bracket supplied with the cooker must be fitted by the installer (see Fig.7).
1.Place the cooker in its intended position and mark the cooker height.
2.Mark 165mm below the cooker height. This is the position of the stability bracket.
3.Fix the stability bracket (using two of the provided five fixing holes) to the rear wall (see diagram).
4.Pull the cooker towards the rear wall as shown in the diagram. The stability bracket should then come into contact with the rear panel of the cooker.
Check that the stability bracket securely prevents the cooker from accidently tipping forward when a downward force is applied to the open oven door.
165 mm |
REAR WALL |
Fig. 7
22
