
| Tips | |
ENGLISH | • | EQ disp * |
| Displays the current setting of equalizer curve, if the equal- | |
| izer has been set. | |
| (See “Setting the equalizer”) | |
• | bAS | |
| For enhanced bass centered @ 72 Hz, Blaupunkt’s | |
| function can be set for either each band and CD/CD changer/ | |
|
| |
|
| AUX mode. Reduce |
|
| speakers and add on amplifires sound distorted at the pre- |
Setting the equalizer
You can select an equalizer curve for 4 music types (Rock, Pop, Classic, Jazz).
Selecting the equalizer curve
1. | Press the AUDIO to select the BAS/TRE adjustment mode. |
2. | Press the preset button 1 ~ 6/ to select the desired |
equalizer curve. “ | ” will light on the display window. |
Setting the sound stage
You can select/adjust the position of sound stage to best serve a particular seat.
Selecting the sound stage
1. | Press the AUDIO to select the BAL/FAD adjustment mode. |
2. | Press the preset button 1 ~ 6/ to select the desired |
| sound stage as follows. |
| ferred sound level. |
• | AU GAIN (AUX gain) |
| Adjust the input volume of the external equipment. |
| It is displayed only AUX mode. |
• | LMt LEVEL (Limit volume) |
| Adjust the volume at the time of power on. You can adjust |
| with the actual sound. |
• | MUt LEVEL (Mute level) |
| You can adjust the mute level with the actual sound. |
• | 1 | ROCK |
• | 2 | POP |
• | 3 | CLASSIC |
• | 4/MIX | JAZZ |
• | 5/RPT | USER 1 |
• | 6/ | USER 2 |
•1
•2
•3
•4/MIX
•5/RPT
•6/
POS 1 (For the left seat) | B R2 | F R4 | |
POS 2 (For the front seat) | B 0 | F R4 | |
POS 3 | (For the right seat) | B L2 | F R4 |
POS 4 | (For the rear seat) | B 0 | F F4 |
POS 5 | (For all the seat) | B 0 | F 0 |
POS 6 | (For all the seat) | B 0 | F 0 |
• Settings for BASS, TREBLE, LOUDNESS and |
made to each of the following modes independently: |
FM/AM/CD/CD changer/AUX |
Adjusting the equalizer curve
You can store and adjust the equalizer settings for frequency and level.
1. | Press the AUDIO to select the BAS/TRE adjustment mode. | |||
2. | Adjust the desired sound characteristics with BAS/TRE/ | |||
3. |
| |||
Press the | 5/RPT or 6/ | for more than 2 seconds to store | ||
| the equalizer curve. |
| ||
| • | 5/RPT | USER 1 |
|
| • | 6/ | USER 2 |
|
Cancelling the equalizer curve | ||||
1. | Press the | AUDIO to display the current equalizer curve. | ||
2. | Press the | MUTE / SENS | while the name of equalizer curve | |
| blinking to cancel the equalizer curve. | |||
| The “EQ OFF” will blinking for few seconds. |
Adjusting the sound stage
1. | Press the AUDIO to select the BAL/FAD adjustment mode. |
2. | Adjust the desired sound stage. |
3. | Press the desired preset button 1 ~ 6/ for more than |
2 seconds to store the desired sound stage.
SacramentoCD33_Eng | 4 | 2/5/03, 4:27 PM |