| Turn on/off message edit | ||
ENGLISH | You can edit the turn on/off message and store it in memory. | ||
Following four messages can be edit with 8 characters each. | |||
| |||
|
| ||
| • HELLO (MESG 1) / WELCOME (MESG 2) | ||
|
| ||
| • SEE YOU (MESG 3) / | ||
| 1. | Repeatedly press the DISP to display the “MESG ON” on | |
| 2. | the display window. | |
| Press the SC/PS to flash the “HELLO”. | ||
| 3. | Rotate the VOL dial to select the desired message you | |
|
| want to edit. | |
|
| HELLO ➜ WELCOME ➜ SEE YOU ➜ GOOD- BYE | |
| 4. | Press the SC/PS , then enter the character. |
A. Rotate the VOL dial in a clockwise direction to select the desired characters.
( A ➜ B ➜ C ➜ . . . Z ➜ < ➜ > ➜ ∗ ➜ + ➜ ′ ➜ − ➜ ′ ➜ / ➜0➜1➜2➜3...9➜“ ”Space )
B. Rotate the TUN/TRK dial to move the flashing cur- sor.
C. Repeat steps A. and B. to complete entering the en- tire message 8 characters max.
Tips
Erasing the turn on/off message
You can erase the turn on/off message if so desired.
1. Repeatedly press the DISP to display the “MESG ON” on the display window.
2. Press the SC/PS , then rotate the VOL dial to select the desired message you want to erase.
3. Press the SC/PS , then press the DISP for more than 2 seconds.
4. To return to the normal radio reception, Press DISP . Repeat steps 2. and 3. if you want to erase other mes- sage.
•To erase /correct a message, press the DISP for more than 2 seconds to clear the character and
•If you make no button input or dial operation in 20 sec- onds, the message edit mode will turn off automatically.
•Make sure the “MESG” will be “ON” .
•When entering a name, pressing the following buttons af- fects the display of characters as follows.
1: Changes to inputting letters. (Starts with “A”.)
2: Changes to inputting numbers. (Starts with “0”.)
3: Changes to inputting characters. (Starts with “<”.)
6: Enters a space (blank).
5.Press the SC/PS to store the message. The new message flashes.
6.To return to the normal radio reception, Press DISP .
SacramentoCD33_Eng | 6 | 2/5/03, 4:27 PM |