DNC - DYNAMIC NOISE COVERING

DNC - Dynamic Noise

Switching DNC line-up on/off

Covering

To switch DNC line-up off,

Dynamic Noise Covering – masking of vehi-

➮ press the DSA button 6;

cle noise.

➮ press the soft key 4with the display

When your vehicle is in motion, the DNC sys-

allocation “DNC”.

The last selected DNC increase appears on

tem raises the radio volume to the volume

you consider pleasant when your vehicle is

the display.

 

stationary.

➮ Press the

button 7.

The volume is raised depending upon fre-

“DNC OFF” appears on the display.

quency ranges and noise development inside

➮ Press the DSA button 6. The settings

the vehicle.

are now stored.

As a result, volume and sound remain agree-

To switch DNC back on again,

able even when vehicle noise changes. Short-

➮ press the DSA button 6;

term noises, such as those arising when you

cross a railway track, are not taken into ac-

➮ press the soft key 4with the display

count.

allocation “DNC”.

Lining up DNC

“DNC ON” appears on the display.

➮ Press the

button 7.

For operation to suit your vehicle, the system

The DNC increase last selected before switch-

must be lined up using the special micro-

ing off appears on the display.

phone. Please do not line up DNC until you

➮ Press the DSA button 6. The settings

have aligned the hifi. The microphone should

be permanently mounted near to the console

are now stored.

using the self-adhesive tape provided, how-

Setting the DNC increase

ever not in the leg area, in resounding places

or near the fan/heater vents.

You can set the DNC increase, i.e. the sensi-

The microphone mouthpiece should point

tivity with which the volume and tone are

towards the passenger area. It is best to line

raised, in five steps.

up the system in a quiet place with the en-

The “DNC 1” setting is suitable for vehicles

gine switched off.

with a loud engine and heavy-bass music. The

 

Starting DNC line-up

“DNC 5” setting is for vehicles with a quiet

engine and classical music. Experiment with

➮ Press the DSA button 6.

the settings to find the one you prefer.

 

➮ Hold down the soft key 4with the dis-

To set the DNC increase,

play allocation “DNC” until “DNC ADJ”

➮ press the DSA button 6;

appears on the display.

➮ press the soft key 4with the display

DNC line-up now begins. Once “DNC 3” ap-

pears on the display, line-up has been com-

allocation “DNC”;

 

 

 

 

 

 

pleted.

➮ select the desired increase using the

➮ Press the OK button 5.

 

 

or

 

button 7;

 

 

 

 

 

 

 

 

 

➮ press the OK button 5.

➮ Once you have completed all settings, press the DSA button 6.

ENGLISH

33

Page 33
Image 33
Blaupunkt CD70 DNC Dynamic Noise, Covering, Switching DNC line-up on/off, Lining up DNC, Setting the DNC increase