Blaupunkt DM2000 Mode Selector, Adjusting the Sound Characteristics, Remote Control Optional

Mode Selector

ENGLISH	Each time the DISP	is pressed, the display window will change
	STN CALL	LEVEL 1 Temporary	METER 1
	over as shown below;
	Priority
		(NO NAME)
	CLOCK 12	CLK ADJ	MESSAGE
	Display priority setting
FRANÇAIS	Display Priority can be set for the following items;
	Radio mode

• Frequency and Station Name, plus during

CDC (CD changer) mode

• Disc No, Track No, Track time and Disc name.

Example

To set Station Name to the Display Priority.

	1.	Press the DISP	three times, and the temporary display
ESPAÑOL	2.	appears in the display window.
		Hold the DISP	pressed for more than 2 seconds.
		“ NO NAME” or a previously assigned station name blinks
		once to indicate that Station Name is selected for the Dis-
		play Priority.
		After 5 seconds, the display mode will automatically re-
		turn to the Display Priority showing either “NO NAME” or
		the station name.
		Tip
		Frequency Display is initially set to the Display Priority,
PORTUGUÊS		and Station Name (“NO NAME”) is set to the “Tempo-
		rary” indicator.

Adjusting the Sound Characteristics

1. Press the	AUD to select the desired adjustment mode
as follows;
BASS 0	TREBLE 0	LOUD OFF (LOUDNESS)
R0 F0 (FADER)		L0 R0 (BALANCE)

2. Rotate the dial to adjust the selected item.

Adjust within 3 seconds after selecting the item. After 3 seconds, the dial reverts to volume control. Use the fol- lowing tables as a guide for adjusting the settings in each mode.

Adjustment Range

BASS	BASS -5	BASS +5
TREBLE	TREBLE -5	TREBLE +5
LOUDNESS	LOUD OFF	LOUD ON
BALANCE	L9 R0(Full left)	L0 R9(Full right)
FADER	R9 F0(Full rear)	R0 F9(Full front)

Tip

Settings for BASS, TREBLE, LOUDNESS and XBASS can be made to each of the following modes independently:

FM, AM, CD Changer and AUX.

Switching the Source (Selecting auxiliary input)

You can connect the auxiliary equipment (Portable cassette player, etc.) to this radio via optional AUX-IN cable. (See page 11)

Each time the SRC is pressed, the operation source will change over as shown below;

	CD	CD changer or AUX
Press the	BND / TS	to return to tuner mode.
Note
If the SRC	button is pressed when no CD has been loaded

into the unit, The CD mode will skip to the CD changer mode or AUX mode.

Also, if the CD changer is not connected, the system will move across to the AUX mode regardless of whether auxiliary equip- ment is connected or not (“MP3/AUX” will be displayed.)

It is not possible to switch to the AUX mode when the CD changer is connected.

Remote Control (Optional)

You can operate your receivers basic AM, FM, CD & CDC features via an optional IR Remote Control. Optional Credit Card type remotes are available.

E-4

Key Largo (Eng) p.1-13 4 6/19/00, 10:02 AM