ADJUSTING THE VOLUME
If a traffic information message is re- ceived during a telephone call or whilst a navigation announcement is being made, the traffic message will only be played after the call or voice output is finished.
If you are already listening to a traffic announcement and a telephone call arrives or the navigation system wish- es to make a voice output, the traffic announcement will first be heard. Once the traffic message is finished, you can listen to the call or the voice output.
You can set the volume level at which telephone calls and the navigation voice output will first be heard.
➮Press the MENU button :.
➮Keep pressing the 
or 
button 9until “TEL VOL” appears in the display.
➮Set the required volume using the 
and 
buttons 9.
When you have finished making your changes,
➮press the MENU button :twice.
Note:
●Using the volume control =, you can directly adjust the volume of telephone calls and navigation voice output (whilst they are being heard).
Confirmation beep
For some functions you will hear a con- firmation beep if you keep a button pressed for longer than two seconds. For instance, after storing a radio sta- tion to a station button you will hear a confirmation beep. The beep can be switched on/off.
➮Press the MENU button :.
➮Keep pressing the 
or 
button 9until “BEEP” appears in the dis- play.
➮Use the 
and 
buttons 9 to switch between the options.
“OFF” means beep off, “ON” means the beep is switched on.
➮Press the MENU button :.
ENGLISH
31
