BLAUPUNKT SPECIFICATIONS - PA275 AND PA2100, 2/1 CHANNEL AMPLIFIER
Below is a basic
PARAMETER/FEATURE |
| PA275 | PA2100 |
Channels |
| 2/1 | 2/1 |
|
|
|
|
Size ( W x H x D) |
| 7.9 x7.5x2.6 inches (200x190x67mm) | 7.9 x7.5x2.6 inches (200x190x67mm) |
|
|
|
|
Weight (with housing) |
| 4.6 lbs (2.1 kg) | 4.6 lbs (2.1 kg) |
|
|
|
|
Crimping style speaker terminals? |
| YES | YES |
|
|
|
|
Maximum terminal wire size |
| 14 ga. | 14 ga. |
|
|
|
|
Subsonic filter |
| YES (10 Hz) | YES (10 Hz) |
|
|
|
|
Separate front/rear or left/right gains? |
| NO | NO |
|
|
|
|
Fuse Type |
| ATC spade | ATC spade |
|
|
| |
Speaker short, short to +12V, and short to ground protection? | YES | YES | |
|
|
|
|
High, low, and reverse voltage protection? |
| YES | YES |
|
|
|
|
Power output transistors |
| MOSFET | MOSFET |
|
|
|
|
Switching power supply transistors |
| MOSFET | MOSFET |
|
|
|
|
Minimum speaker impedance | 2 ohms | 2 ohms | |
|
|
|
|
| (bridged) | 4 ohms | 4 ohms |
|
|
|
|
PERFORMANCE DATA |
|
|
|
Rated power output @ 0.1% THD, 13.8V |
|
|
|
|
|
|
|
2 channels into 4 ohms / 2 ohms |
| 2 x 75 W / 2 x 100 W | 2 x 100 W / 2 x 150 W |
|
|
|
|
1 channel into 4 ohms |
| 1 x 200 W | 1 x 300 W |
|
|
|
|
Total Harmonic Distortion @ rated full output |
| 0.03% THD | 0.03% THD |
|
|
|
|
Rated Signal/Noise ratio (averaged value) |
|
|
|
|
|
|
|
Measured @ 1 watt / 1 kHz | dBA | 82 | 82 |
|
|
|
|
Measured @ full rated power (0.1% THD) | dBA | >100 | >100 |
|
|
|
|
Damping factor |
| >100 | >100 |
|
|
|
|
Frequency response |
| 20 - 50,000 Hz | 20 - 50,000 Hz |
|
|
|
|
| 50 H z - 250 Hz (variable), 12dB/oct | 50 H z - 250 Hz (variable), 12dB/oct | |
|
|
|
|
| 50 H z - 250 Hz (variable), 12dB/oct | 50 H z - 250 Hz (variable), 12dB/oct | |
|
|
|
|
Input impedance |
| 10 kohms | 10 kohms |
|
|
|
|
Input signal voltage control range |
| 0.3 - 6.0 vrms | 0.3 - 6.0 vrms |
|
|
| |
Current Draw @ 13.8 VDC (typical values @ X watts / Efficiency %) |
|
| |
|
|
|
|
@ full rated power, bridged mode | (@ 4 ohms) | 28 A (65%) | 36 A (65%) |
|
|
|
|
@ full rated power, unbridged | (@ 4 ohms) | 16 A (78%) | 21 A (78%) |
|
|
|
|
@ 33% rated power, unbridged | (@ 4 ohms) | 6.0 A (60%) | 8.0 A (60%) |
|
|
|
|
@ 10% rated power, unbridged | (@ 4 ohms) | 3.0 A (40%) | 4.0 A (40%) |
|
|
|
|
@ idle | (@ 4 ohms) | 1.2 A | 1.5 A |
|
|
|
|
Minimum battery voltage to maintain rated power |
| 12.6 VDC | 12.6 VDC |
|
|
|
|
Usable battery voltage |
| 10 - 16 VDC | 10 - 16 VDC |
|
|
|
|
Trigger line voltage range |
| 10 - 16 VDC | 10 - 16 VDC |
|
|
|
|
Trigger line current draw |
| @ 20 mA | @ 20 mA |
|
|
|
|
Turn on delay time |
| @ 2.0 seconds | @ 2.0 seconds |
|
|
| |
Thermal shutoff temperature (average | @ 85˚ C (185˚ F) | @ 85˚ C (185˚ F) | |
|
|
|
|
NOTE: DUE TO ONGOING PRODUCT IMPROVEMENTS, DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ADVANCED NOTICE TO THE CONSUMER OR RETAILER.
