![](/images/new-backgrounds/1020489/2048919x1.webp)
Tape operation
The car stereo has to be switched on. | Fast Forward/Rewind |
The unit automatically switches to tape op- |
|
eration when a cassette is inserted. |
|
portion of at least three seconds between the individual tracks.
Switching the tape side
Inserting a tape
•Turn on the set.
•Insert a tape.
The tape will be automatically transported to the playback position. Side A or 1 starts to play.
During tape operation, “TR 1” or “TR2” (track) will show on the display panel.
Insert the tape with side A or 1 facing up, the open side showing to the right.
Removing a tape
•Press C .
The cassette will eject.
>>Fast forward
<< Fast rewind
A / V Track selection
Stop function by pressing AV.
Selecting tracks with S-CPS
(Super Cassette Program Search)
Use this function to skip (A) and repeat (v) recorded tracks.
A maximum of nine tracks can be skipped. To do so,
•press the rocker switch as many times as required.
The number of tracks to be skipped appears on the display panel.
If necessary, you can correct your entry by pressing the opposite rocker switch button. Stop by pressing AV.
For a proper operation of the
(autoreverse)
To change the tape direction during cassette III playback:
•Press A V .
At the end of a tape side, the mechanism changes directions automatically to play the other side (autoreverse). The display shows
Notice:
If there is too much tension on the tape during playback, the set may switch over by itself before having reached the end of the tape side. In this case check the condition of the cassette tape. Sometimes it helps to rewind it completely.
Tape equalisation
When a metal or CrO, tape is inserted, the tape mechanism automatically adjusts to metal/CrO, tape equalisation.
The “MTL” indicator will illuminate.
19
gg;ing cassette tracks with
You can have the cassette tracks played briefly by using the scan function. If you like a title, stop the scan to continue listening to that track.
To start/stop the scan function:
•Press the SC button briefly.
You can individually adjust the scan time in the DSC menu (see “DSC programming- SCANTIME”).
Dolby B NR*
With this unit you can play back tapes re- corded with
Cassette tapes recorded with Dolby NR* stand out by their reduced tape hiss and the
Skipping unrecorded tape por- tions with Blank Skip
This function senses an unrecorded tape portion continuing for more than 15 seconds and automatically fast forwards the cassette to the beginning of the next track.
During fast tape winding,
To switch the Blank Skip function on and off:
•Press the RM button for approximately one second until you hear a beep.
When the function has been activated, “BLS” will appear in the display.
Listening to the radio during fast tape winding with RM
(Radio Monitor)
Care notes
To avoid possible problems, we recommend you to use
Use a head cleaning tape to remove nor- mal dirt
improved dynamics.
If
To switch on/off:
•Press B (not during scan operation).
•Noise Reduction system manufactured under license
from Dolby Laboratories Licensing Corporation. “Dol- by” and the
When the tape is fast forwarded or rewound (also with
•Press R M .
When the function is active, “RM” will light up in the display.
20