![](/images/new-backgrounds/1020489/2048917x1.webp)
Program types
Use cc>> to have the last selected program type displayed and to choose a new one. You can select any one of the stored types with the preset buttons 1 - 6.
Condition: PTY must be active.
All of the program types listed below are available.
The letters printed in bold are identical to the actual
play.
NEWS INFORM
SPORTS
TALK
ROCK
CLS ROCK
ADLT HIT
SOFT RCK
TOP 40
COUNTRY
OLDIES
SOFT
NOSTALGA
JAZZ
CLASSICL
R & B
SOFT R&B
LANGUAGE
lf’fhe system is unable to find a station of- fering the selected program type, the dis- play will show “NO PTY” and a beep tone will be released. The station received be- fore starting seek tuning will be tuned in.
Storing program types
One program type was assigned to each of the preset buttons
If desired, you can also store other availa- ble program types.
To do so, make sure that “PTY” lights up in the display.
•If necessary, press the PTY button to switch on the function.
•Select a program type using buttons cc >> and
•hold down the desired preset button
Now the selected program type can be re- called by pressing this preset. For this the PTY function must be active.
REL MUSC
REL TALK
PERSNLTY
PUBLIC
TEST (used for factory testing)
PTY 23 to PTY 29 have not been assigned.
Checking the program type of the sta- tion
•Press PTY for approximately two sec- onds.
After the beep tone the display will show the program type offered by the tuned in sta- tion.
Displaying the selected program type
•Press <c or >>.
The program type selected last will be dis- played briefly.
Selecting a program type
a)Using the preset buttons
When PTY is switched on, you can use the preset buttons
• Press one of the presets 1 - 6. The selected program type will be dis- played for two seconds.
Scanning stations with
•Press the SC button.
All received stations offering the selected program type will be scanned.
To switch off
•Press SC once again.
Emergency Alert System
Your RDS tuner is also able to automatical- ly receive any RDS emergeny announce- ments broadcast during extraordinary cir- cumstances.
Notice:
As earlier mentioned, these functions are currently only supported by a limited number of RDS stations.
If you wish to listen to a station with this PTY,
•press NV to start seek tuning op- eration.
If the system is unable to find a station of- fering the selected program type, the dis- play will show “NO PTY” and a beep tone will be released. The station received be- fore starting seek tuning will be tuned in. You can assign different program types to each preset position. Please refer to the next chapter “Storing program types”.
b)Using the cc >> buttons of the rocker switch
When PTY is switched on, you can se- lect a program type using buttons
<< >>.
•Press cc or >>; the program type selected last will be displayed for three seconds.
•During this period press >> (for- wards) or <c (backwards) to select the desired type.
•Press cc or >> as many times as required.
If you wish to listen to a station offering the selected PTY,
•press A/V to start seek tuning op- eration.
17
18