DSC programming
Proceed as described above for all of the CDs/magazines for which the entered name is to be maintained.
•After having updated the last maga- zine, press d.
To quit the function,
•press DSC.
The system has saved the name informa- tion for all of the CDs which were inserted. For all other discs the CD names have been deleted.
DSC (Direct Software Control) allows YOU to customise certain programmable, basic settings to suit your personal needs and preferences and then store them.
The basic settings for this audio equipment were made at the factory.
In the following you can find an overview of these settings, so that you can always reset to these if desired.
If you wish to alter any of the programming,
•press DSC.
Use the rocker switch and the @j button to select and adjust the functions described in the following. The display will show you the adjusted condition.
LOUDNESS Loudness - When listenina |
| |
| at a low level, the Loudness |
|
| function creates a more nat- |
|
| ural sound by boosting the |
|
| low frequency range. |
|
| LOUD 1 - Low boost | I |
| LOUD 6 - Max. boost | |
TA VOL | Used in USA for Emergency |
|
| Alert System volume level. |
|
SPEECH In future many RDS radio stations will differentiate be- tween music and speech programs.
You can alter the tone for speech programs from be- tween “SPEECH 0 . . . 4”.
SPEECH 0:
N V Select function
cc >> Adjust/recall value
CDC NAME Only available for CD changer playback (optional). Use this function to name your CDs. (See “Entering CD names”).
Music and speech as per AUD bass and treble set- tings.
SPEECH 1:
Linear reproduction (bass, treble and Loudness set to “O?
. .
ANGLE
BRIGHT
SPEECH 2-4:
Different settings for vol- ume, bass and treble with the Loudness being switched off.
Try out which SPEECH set- ting you like most.
Acknowledgement tone for all functions which require a button to be pressed for more than one second.
The volume can be adjusted from between 0 to 9. (0 = off).
Use this setting to alter the viewing angle to your liking from
You can adjust the display brightness from between 1 to 16. You can also select different values for day and night.
Selecting the night bright- ness:
Switch on the vehicle lights and program the brightness value. The car radio’s light- ing connector must be hooked up to the vehicle’s electric system for this to function properly.
COLOUR
(Variocolour) For gradually matching the radio illumination with the dashboard lighting.
green . . . . . . . . . . . . . light orange . . . . . . . . . . . . . . . . . red
LED ON | Here you can choose be- |
| tween LED ON or LED OFF. |
| With LED ON, the KeyCard |
| tongue will flash for extra |
| |
| the unit has been switched. |
| off and the KeyCard re- |
| moved. |
READ KL
SCANTIME
7!?
To read out the KeyCard data.
The card supplied with the radio is used to display the model name, type number (7 6..) and the serial number.
If you remove the KeyCard during the reading process, “READ KC” will show on the display panel. The unit con- tinues to play but does not accept any operations ex- cept from being switched off.
Use this function to set the scan time for the radio or CD player from between five and 30 seconds.
To adjust the seek tuning sensitivity for distant recep tion.
DX 1 - high sensitivity DX 3 - low sensitivity
LEARN KC To “train” a replacement KeyCard.
Please read the information in chapter “KeyCardtheft protection system - “Replac- ina” a KevCard”.
24
