Maintenance
Troubleshooting Guide
| POSSIBLE CAUSE(S) |
| SUGGESTED REMEDY |
|
|
|
|
| SYMPTOM: Blower motor(s) not running |
|
|
|
|
|
|
S | Power switch turned OFF | S | Turn to ON position |
S | No power to oven | S | Replace main fuses or reset breakers |
S | Bad capacitor | S | Replace capacitor |
S | Motor(s) burned out | S | * |
|
|
| |
| SYMPTOM: Oven will not heat (heat on light will not come on). | ||
|
|
|
|
S | Temperature controller not properly installed | S | Reinstall |
S Internal problem with main temperature controller | S | * | |
S | Loose probe connections at main temperature | S | * |
| controller |
|
|
S | Short in probe | S | * |
|
|
|
|
| SYMPTOM: Elements will not heat. |
|
|
|
|
|
|
S | Power switch turned OFF | S | Turn to ON position |
S | Main temperature controller not set above | S | Set to desired temperature |
| ambient temperature |
|
|
S | Defective main temperature controller | S | * |
S | Defective heating relay | S | * |
|
|
|
|
*Denotes remedy is a difficult operation and should be performed by qualified personnel only. It is recommended, however, that All repairs and/or adjustments be done by your local Blodgett service agency and not by the owner/operator. Blodgett cannot assume responsibility for damage as a result of servicing done by unqualified personnel.
WARNING!!
Always disconnect the power supply before cleaning or servicing the oven.
16