Maintenance

 

 

 

 

 

 

 

 

 

 

 

 

Troubleshooting Guide

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

POSSIBLE CAUSE(S)

 

SUGGESTED REMEDY

 

 

 

 

 

 

 

 

 

SYMPTOM: Oven will not reach desired temperature

 

 

 

 

 

 

 

 

S

No power to oven

S

Replace main fuses

 

 

 

 

S

Blower motor(s) not running

S

Check control switch and/or fuses

 

 

S

Defective heating element relay

S

*

 

 

 

 

S

Shorted probe

S

*

 

 

 

 

S

Heating element(s) burned out

S

*

 

 

 

 

S Internal problem with main temperature controller

S

*

 

 

 

 

S

Cooling fan not working properly

S

*

 

 

 

 

 

 

 

 

 

 

 

 

 

SYMPTOM: Conveyor belt will not run

 

 

 

 

 

 

 

 

 

 

 

 

S

Control circuit fuse blown

S

Replace fuse

 

 

 

 

S

Belt hooked on something in oven

S

Turn oven OFF. Unhook and resolve problem

 

 

S

Defective conveyor drive motor

S

*

 

 

 

 

S

Defective conveyor drive motor controller

S

*

 

 

 

 

 

 

 

 

*Denotes remedy is a difficult operation and should be performed by qualified personnel only. It is recommended, however, that

 

 

 

 

All repairs and/or adjustments be done by your local Blodgett service agency and not by the owner/operator. Blodgett cannot as-

 

 

sume responsibility for damage as a result of servicing done by unqualified personnel.

 

 

 

 

 

 

 

 

 

WARNING!!

Always disconnect the power supply before cleaning or servicing the oven.

17