PROGRAMMING (continued)
The factory programming has the After Hours™ mode turned OFF.
While in the After Hours mode, the POWER LED will flash continuously.
Keypadlock™ deters unauthorized operation of the brewer. This feature is OFF in the standard factory settings.
12.After Hours™: The After Hours™ can be programmed to come on from 1 to 6 hours after the last brew. When the Brewer goes into the After Hours™ mode, the water in the tank will be allowed to drop from the normal brewing temperature and will reheat less frequently – this feature saves energy and extend component life. When a START BREW key is pressed the Brewer automatically reverts back to normal operation, heating the water to the Precise Temperature for Brewing™ (PTB™), before starting the brew. (The POWER LED will be on continuously and the BREW LED will flash until the correct water temperature is reached.)
13.Pulse or
14.Keypadlock™: If the Keypadlock™ feature is activated, there will be no response by the brewer when the keys are pressed (except for the beep after a key is pressed).
To temporarily “unlock” the keypad, press and hold the 2nd key for 6 seconds. A beep will sound, indicating the keypad is temporarily “unlocked”, — a brew can be initiated, etc.
The keypad will remain unlocked until the brew is completed, then automatically return to keypadlock™ mode. If a brew is not initiated 60 seconds after “unlocking”, the system will time out and return to the “locked” position.
15.View Filter Statistics: To view filter statistics, from the OFF mode, press and hold the 6th key, and touch the 3rd key to viewTotal Water Volume (TotalVol.) Touch the 3rd key again to view the filter life (FltrLife:). The percentage of the filter that has been used will be displayed.
16
