PROGRAMMING (continued)
7.Automatic Start-Up in Previous Mode:
If the Satellite Brewer automatic timer is OFF (the factory setting) and power is disconnected, the brewer will start up when power is restored, in the mode it had been in prior to the power disconnection. If the Satellite Brewer has the timer setting ON and power is disconnected, the brewer will start up in the mode that it should be in at the time the power is restored.
8.Brew Volume:
The Brewer can have up to 3 different brew volumes on each side. When a volume other than the standard, or first brew volume, is selected, the Brewer will complete that volume and then automatically reset to the standard, or first brew volume.
To view, press the individual volume key. The brew volume will be displayed on the screen for 3 seconds. If there is no brew volume for a specific key, the screen will read “no volume prog”, (i.e. no volume programmed).
9.Clock
Time – Battery Backup. The Satellite Brewer has a battery backup system which will maintain the proper time during power failures, or when the brewer is unplugged (even for very prolonged periods of time). Normally there will not be a need to set the time except for Daylight Saving Time changes, or moving the brewer to different time zones.
10.Changing Day and Time: To change time, in the OFF mode, press the 2nd key twice followed by the 1st key twice to access the time change mode. In the time change mode he screen will read “Day:” followed by the current day setting. Use the 6th key to advance the day, or the 5th key to reverse.
When day has been properly set, press the 3rd key. The screen will now read “Time:” with the set time on the screen, the hour and am or pm flashing. Use the 6th key to advance the hour, or the 5th key to reverse, making sure that the am or pm is correct.
When the hour and am/pm is correctly set, press the 3rd key, and the screen will read “Time:” with the set time on the screen, minutes flashing. As previously, use the 5th or 6th keys to adjust the minutes, and press the 3rd key when complete. The Brewer will return to the off mode. (Changing time can also be done in the regular programming mode.)
Brew Volume
The 1st key is the Standard Brew Volume.
When a brew volume other than standard brew volume is selected, the Brewer will complete that brew then return to the standard brew volume automatically.
15
