OPERATION (continued)
DRAWER WARMER OPERATION (when provided)
1 | 2 | 3 |
|
| ºF |
|
| ºC |
|
| LOAD |
PROCESS |
|
|
4 |
| 5 |
|
| ºF |
|
| ºC |
LOAD
| PROCESS |
Series Ventless Combo Cook Center |
|
ºF | |
| |
304456 OpManual | ºC |
LOAD | |
PROCESS | |
508 p/n |
|
| HOLD |
| 10 SEC. |
ITEM DESCRIPTION
1PROCESS Key:
Press to view actual temperature of cavity.
24 Character LED Display:
Normally shows SETPOINT temperature. ºF or ºC Indicator:
3Glows to indicate if unit is configured for degrees Fahrenheit or degrees Celsius.
4LOAD Indicator:
Glows when heating element is energized. Increment and Decrement Keys:
5Press UP arrow to increase Press DOWN arrow to decrease
RWT- CONTROL MODULE
SET SETPOINT TEMPERATURE
Press an arrow key:
UP arrow to increase DOWN arrow to decrease
Release key when desired setpoint temperature is displayed.
Reading is locked into memory 3 seconds after last key stroke.
Minimum setpoint is 140ºF (60ºC)
Maximum setpoint is 250ºF (121ºC)
CHANGE DISPLAY MODE ( ºF or ºC)
Press and hold UP arrow and DOWN arrow keys for 10 seconds.
Release keys when display reads F C.
Within 3 seconds, press UP arrow or DOWN arrow key until desired indicator (ºF or ºC) glows.
The new value will lock into memory 3 seconds after last keystroke.
17