Manuals / Brands / Lawn and Garden / Patio Heater / Blue Rhino / Lawn and Garden / Patio Heater

Blue Rhino 450000 Step 12 – Check for Leaks, Check Gas Line / Tank valve for leaks:

1 44

Download 44 pages, 2.45 Mb

Contact 1-800-762-1142 for assistance.	®
Do not return to place of purchase.

Step 12 – Check for Leaks

•Make 2-3 oz. of leak check solution by mixing one part liquid dishwashing soap and three parts water.

•Turn tank valve ON.

•Check Gas Line / Control Valve for leaks:

•Spoon several drops of solution onto Gas Line and Control Valve connection.

•Inspect the solution at the connection to look for bubbles.

•If NO bubbles appear, then the connection is secure.

•If bubbles appear, there is a leak -

•Turn Tank valve OFF.

•Loosen screw on Clip.

•Release Gas Line fitting from control valve and re-attach making sure connection is secure (see Step 7).

•Retighten Clip.

•If you continue to see bubbles after several attempts, contact 1-800-762-1142 for assistance.

Check Gas Line / Tank valve for leaks:

•Turn tank valve ON.

•Spoon several drops of solution onto Gas Line and Tank valve connection.

•Inspect the solution at the connection to look for bubbles.

•If NO bubbles appear, then the connection is secure.

•If bubbles appear, there is a leak:

•Turn Tank valve OFF.

•Release Gas Line fitting from Tank valve and re-attach making sure connection is secure (see Step 11).

•If you continue to see bubbles after several attempts, contact 1-800-762-1142 for assistance.

•Turn Tank Valve OFF.

Owner’s manual: model 200209 outdoor patio heater

7/28/04

12

Contents

Page Page Page Before you do anything else read and understand all precautions in Safety First “20 lb.” LP Tank Beware of Spiders Need a tank or gas Page General Components & Features Additional Requirements Step 1 – Attach Legs to Base Step 2 – Attach Platform to Legs Step 3 – Attach Weight Plate to Base Step 4 – Insert Gas Line through Platform/Attach Shroud Cover Step 5 – Attach Engine to Post Step 6 – Attach Engine/Post to Platform Step 7 – Connect Gas Line to Engine Step 8 – Assemble dome Step 9 – Attach Dome to Emitter Step 10 – Secure Gas Line Step 11 – Connect Gas Line to Tank Step 12 – Check for Leaks Check Gas Line / Tank valve for leaks: Step 13 – Replace Engine Access Panel Step 14 – Install Igniter Battery Before Turning Gas Supply ON Before Lighting Lighting When heater is ON: Re-lighting Shut Down Before Operating After Operation If the problem is: And this condition exists: Then do this Pilot won’t light Pilot won’t stay lit • Do NOT touch or move heater for at least 45 minutes after use • Dome is hot to the touch • Allow dome to cool before Between uses: During periods of extended inactivity or when transporting: Page Page Si necesita ayuda llame al No devuelva el artículo al lugar de compra Page Antes de hacer nada más, lea y comprenda todas las instrucciones en ¡La Seguridad, lo Primero Bombona de PL de 9 kg Tenga cuidado con las arañas ¿Necesita una bombona de gas www.bluerhino.com Page Componentes Generales y Características Requisitos adicionales Paso 1 – Acoplar las patas a la base Paso 2 – Acoplar la plataforma a las patas Paso 3 – Acoplar la placa de lastre Paso 4 – Insertar la línea de gas a través de la plataforma Acoplar la cubierta de protección Paso 5 – Acoplar el motor al poste Paso 6 – Acoplar el motor/poste a la plataforma Paso 7 – Conectar la línea de gas al motor Paso 8 – Montar la cúpula Paso 9 – Acoplar la cúpula al emisor Paso 10 – Conectar la línea de gas al motor Paso 11 – Conectar la línea de gas a la bombona Paso 12 – Comprobar si hay fugas Compruebe si hay fugas en la línea de gas/bombona: Paso 13 – Volver a colocar el panel de acceso al motor Paso 14 – Instalación de la batería de encendido Antes de activar la alimentación de gas (ON) Antes del encendido Encendido Cuando el calentador está encendido (ON) Reencendido Apagado Antes de la puesta en marcha Tras su funcionamiento Si el problema es: La llama piloto no se enciende La llama piloto no sigue encendida El quemador no se enciende La llama del quemador es baja •No toque ni mueva el calentador durante al menos 45 minutos después de su uso •La cúpula está caliente al tacto •Deje que la cúpula se enfríe antes de tocarla Entre uso y uso: Durante períodos largos de inactividad o para su transporte Page Certificaciones: Consumo: Alcance calorífico: Combustible: Tamaño de la bombona: