Manuals / Brands / Lawn and Garden / Patio Heater / Blue Rhino / Lawn and Garden / Patio Heater

Blue Rhino 450000 General Components & Features, Additional Requirements, Step 1 – Attach Legs to Base, Note: Unpacking note for 200209 patio heater

1 44

Download 44 pages, 2.45 Mb

Contact 1-800-762-1142 for assistance.	®
Do not return to place of purchase.


Assembly Instructions

General Components & Features

Familiarize yourself with all components before proceeding. Refer to page 5 for hardware and components, and page 21 for specifications.

The white ceramic cone in the top of the engine is an important piece. DO NOT REMOVE.

Do NOT attempt assembly unless all components are available. If you believe a component is missing or damaged, contact 1-800-762-1142 for assistance.

Note: All hardware is mounted on a cardboard pack and numbered to match their assembly step.

Additional Requirements

The following items are not included, but are necessary for the proper assembly of your heater. Do NOT attempt to assemble without proper tools. A hex (Allen) wrench is necessary and is included in the parts bag.

(1)7/16” Wrench

(1)9/16” Wrench

(1)7/16” Socket Wrench

(1)#2 Phillips Head Screwdriver

(1)Leak Detection Solution (Instructions on how to make solution are included in step 12)

(1)Precision Filled LP Gas Grill Tank with Acme Type 1 external threaded valve connection (4-5 gallon size)

Note: You must follow all steps to properly assemble heater.

Note: Unpacking note for 200209 patio heater.

When unpacking your heater from the carton, you will find that the engine assembly and the base have been bolted together for shipping purposes. Remove the three nuts at the top of the base and separate the engine from the base. Retain these nuts for use in Step 9.

You are now ready to begin assembly of your patio heater.

Step 1 – Attach Legs to Base

Secure Legs to Base using (2) Small Bolts, (2) Smal Lock Washers and

(2)Small Nuts per leg. Finger tighten only. Do not fully tighten until Step 2.

Attach small ‘S’ hook on Tank Restraint Chain to left leg.

Owner’s manual: model 200209 outdoor patio heater

7/28/04

6

Contents

Page Page Page Before you do anything else read and understand all precautions in Safety First “20 lb.” LP Tank Beware of Spiders Need a tank or gas Page General Components & Features Additional Requirements Step 1 – Attach Legs to Base Step 2 – Attach Platform to Legs Step 3 – Attach Weight Plate to Base Step 4 – Insert Gas Line through Platform/Attach Shroud Cover Step 5 – Attach Engine to Post Step 6 – Attach Engine/Post to Platform Step 7 – Connect Gas Line to Engine Step 8 – Assemble dome Step 9 – Attach Dome to Emitter Step 10 – Secure Gas Line Step 11 – Connect Gas Line to Tank Step 12 – Check for Leaks Check Gas Line / Tank valve for leaks: Step 13 – Replace Engine Access Panel Step 14 – Install Igniter Battery Before Turning Gas Supply ON Before Lighting Lighting When heater is ON: Re-lighting Shut Down Before Operating After Operation If the problem is: And this condition exists: Then do this Pilot won’t light Pilot won’t stay lit • Do NOT touch or move heater for at least 45 minutes after use • Dome is hot to the touch • Allow dome to cool before Between uses: During periods of extended inactivity or when transporting: Page Page Si necesita ayuda llame al No devuelva el artículo al lugar de compra Page Antes de hacer nada más, lea y comprenda todas las instrucciones en ¡La Seguridad, lo Primero Bombona de PL de 9 kg Tenga cuidado con las arañas ¿Necesita una bombona de gas www.bluerhino.com Page Componentes Generales y Características Requisitos adicionales Paso 1 – Acoplar las patas a la base Paso 2 – Acoplar la plataforma a las patas Paso 3 – Acoplar la placa de lastre Paso 4 – Insertar la línea de gas a través de la plataforma Acoplar la cubierta de protección Paso 5 – Acoplar el motor al poste Paso 6 – Acoplar el motor/poste a la plataforma Paso 7 – Conectar la línea de gas al motor Paso 8 – Montar la cúpula Paso 9 – Acoplar la cúpula al emisor Paso 10 – Conectar la línea de gas al motor Paso 11 – Conectar la línea de gas a la bombona Paso 12 – Comprobar si hay fugas Compruebe si hay fugas en la línea de gas/bombona: Paso 13 – Volver a colocar el panel de acceso al motor Paso 14 – Instalación de la batería de encendido Antes de activar la alimentación de gas (ON) Antes del encendido Encendido Cuando el calentador está encendido (ON) Reencendido Apagado Antes de la puesta en marcha Tras su funcionamiento Si el problema es: La llama piloto no se enciende La llama piloto no sigue encendida El quemador no se enciende La llama del quemador es baja •No toque ni mueva el calentador durante al menos 45 minutos después de su uso •La cúpula está caliente al tacto •Deje que la cúpula se enfríe antes de tocarla Entre uso y uso: Durante períodos largos de inactividad o para su transporte Page Certificaciones: Consumo: Alcance calorífico: Combustible: Tamaño de la bombona: