Blueair user manual Settings, Care and maintenance, Blueair ECO10

Settings

To turn on the Blueair unit, plug the cable into a grounded three-prong wall outlet. The blue light-emitting diode indicates that the unit is turned on. Set the control knob to maximum speed for a few minutes of fast initial cleaning.

Then adjust the control to the desired speed. Maximum speed is recom- mended for daytime use, for fast initial cleaning or for very polluted air. Minimum speed is generally recommended for nighttime use.

For best results, run your Blueair unit 24 hours a day, 7 days a week. Round-the-clock operation ensures that a continuous supply of clean, filtered air constantly circulates throughout the room.

Care and maintenance

Blueair air purifiers feature award-winning Swedish design, materials and workmanship. To keep your unit in top condition, we recommend routine cleaning to keep your Blueair unit looking good and working well.

•Vacuum the air intake grille from the inside when you remove the filters to replace them.

•Vacuum the small inlets with a soft brush attachment.

•Wipe the exterior of the unit with a soft, clean, damp cloth.

•Never clean with gasoline, chemical solvents or corrosive ma terial also as these agents may damage the surface.

•Do not allow foreign objects to enter the ventilation or exhaust openings. This may cause electric shock or damage the unit.

•Do not try to repair or adjust any of the electrical or mechanical functions on your Blueair unit yourself. Contact your local dealer or Blueair for warranty information.

Blueair ECO10 5