Basic Operations
IMPORTANT:
The BLUEANT INTERPHONE needs to be ‘paired’ with your Bluetooth mobile phone before you can use the following functions. (See Pairing to your Bluetooth Mobile Phone on page 3.)
Make a Call:
Dial the number using your phone as normal. Audio will automatically be on the headset.
Note: With some phones like Siemens S55 and Panasonic X70, audio is always on the phone during an outgoing call. You will need to press MFB(1) to transfer the audio to your headset.
Answer a Call:
To answer an incoming call just press the MFB(1) for 1 second (1st beep).
Or, Assuming the InterPhone Voice Answer and Reject is activated: Accept a call by loudly saying a word within 10 seconds. (Example: When you receive the ring tone, Say loudly ”Hello!”) The call will be answered. Audio will be on the headset.
Note: See InterPhone Voice Dial and Reject Activation / Deactivation on page 10
End a Call:
Press the MFB (1) for 1 second to end the call (1st beep).
Voice Dial:
Important: First, make sure to activate the voice dial function of your phone. Record at least one voice tag. (Kindly refer to the procedure in your phone’s manual.) Note: Voice dialing entries must be stored in the phone’s memory, not on the SIM card!
1.Press MFB (1) for 1 second (1st beep) to manually activate voice dialing. The Voice dial tone/ beep will be heard on the headset prompting the user to say the voice tag of the contact to call.
2.Say the voice tag. The voice will be played back to you then the phone will dial the number automatically.
7
