BlueAnt Wireless none manual Volume Settings, Reconnect the Interphone

Reject a Call (For Handsfree Profile Phones only):

To reject an incoming call just press the MFB(1) for 2 seconds (2nd beep).

Or, Assuming the InterPhone Voice Answer and Reject is activated, be silent for 10 seconds. The call will automatically be rejected.

Note: See InterPhone Voice Dial and Reject Activation / Deactivation on page 10

Audio Transfer (For Handsfree Profile Phones only):

During an ongoing call, audio transfer can be made.

From BLUEANT INTERPHONE to Phone:

Press the MFB(1) for 2 seconds (2nd beep). The audio will be transferred to the phone.

From Phone to BLUEANT INTERPHONE: Press the MFB(1) for 1 second (1st beep). The audio will be transferred back to the headset.

Volume Settings:

Note: This is for basic volume adjustment once set up. Please see the section in Special Features on High or Low Volume Mode to set the correct volume range for your helmet.

Press Volume Up(3) or down(4) button until desired level is reached.

Automatic Volume Adjustment. When the bike is in motion (motorcycle running and there is driving and background noise): The BLUEANT INTERPHONE will automatically adjust the volume in response to the background noise. Thus, the user can continuously hear the audio clearly even when there is loud background noise.

Reconnect the Interphone:

To reconnect your cell phone to the Interphone after switching off or going out of range.

1)Turn the Interphone ON and Press the MFB(1) once (first beep)

2)Or, use your phones Bluetooth Menu to connect

8