ATTACH MAIN BAR
SET PARKING BRAKE. See the “Parking Brake” section of your stroller owner’s manual.
POSITION ARMS | ASSEMBLE SCREW, PLUG AND BAR |
Rotate arms into an | Insert one pivot screw through one end of main bar |
upright position. | and into pivot plug. |
| Pivot Plug |
| Pivot Screw |
| Main Bar |
POSITION ICSA
Holding pivot screw and pivot plug in place with hand, position ends of main bar over pivot brackets.
INSERT PIVOT PLUG
ON OPPOSITE SIDE
Slip pivot plug | Pivot |
under end of | Bracket |
main bar and |
|
into opening on |
|
pivot bracket. |
|
INSERT PIVOT
PLUG AND SCREW
Slip pivot plug into | Pivot |
opening on pivot | Bracket |
bracket and push |
|
pivot screw flush |
|
against bar. |
|
INSERT PIVOT SCREW
Insert pivot screw | Pivot |
through main bar, | Bracket |
pivot plug and into |
|
opening on pivot |
|
bracket. |
|
INSTALL PIVOT NUT
Reach under fabric seat.
Thread pivot nut onto pivot screw as shown.
TIGHTEN PIVOT NUT
Use a Phillips screwdriver to tighten pivot screw clockwise, while holding pivot nut.
REPEAT STEPS 8 AND 9 FOR OTHER SIDE.
OMA09D | P2 |
