Attach Restraint Belt M/F and Arms

ATTACH RESTRAINT BELT M/F AND ARMS

Repeat on other side.

POSITION ARM

Position arm between canopy and frame.

Align arm hole over fabric grommet and rivet nut.

Insert sharp screw through end of arm, restraint belt grommet, fabric grommet and into rivet nut.

Slide restraint belt M grommet between end of arm and fabric grommet.

Red pull ring should face out.

Hold strap at a 90 degree angle.

90°

Tighten firmly with

Phillips screwdriver.

Note:

If screw does not turn easily, unscrew and start again.

OMA09D

Image 3

Contents

Infant Car Seat Adapter Instructions Accessory Bar Attach Main BAR Attach Restraint Belt M Attach Restraint Belt M/F and Arms Position Restraint Belt F Prepare Stroller for Infant CAR Seat InstallationAttach Restraint Belt F Buckle Belt Position ARM Engage CAR Seat Fasten Restraint Belt Install Infant CAR SeatBritax Lower Seat Back Raise Handle Tighten Restraint Belt Peg PéregoRaise Seat Back Position Handle Position CAR Seat Engage CAR Seat Remove Accessory BAR GracoRaise Seat Back Position Handle Graco To Remove CAR SeatSET Parking Brake Remove CAR Seat Britax Peg Pérego Rotate Tray Tray InstallationRemove Screws Remove Accessory BAR Engage Tray Replace Sharp Screw Remove Restraint Belt MRemove Restraint Belt F Remove Sharp Screw and Belt Infant Car Seat Adapter Warnings Warranty claims must be made through an authorized dealer Limited Warranty