Remove Restraint Belt M, Remove Restraint Belt F

REMOVE RESTRAINT BELT M

Using a Phillips screwdriver, remove sharp screw and restraint belt M.

Insert sharp screw through end of arm, fabric grommet and into rivet nut.

POSITION ARM

Position arm between canopy and frame.

Align arm hole over fabric grommet and rivet nut.

Tighten firmly with

Phillips screwdriver.

Note:

If screw does not turn easily, unscrew and start again.

REMOVE SHARP

SCREW AND BELT

Using a Phillips screwdriver, remove sharp screw and restraint belt F.

REPLACE SHARP SCREW

Insert sharp screw through end of arm, fabric grommet and into rivet nut.

POSITION ARM

Position arm between canopy and frame.

Align arm hole over fabric grommet and rivet nut.

Tighten firmly with

Phillips screwdriver.

Note:

If screw does not turn easily, unscrew and start again.

OMA09D

P10

Image 10

Contents

Accessory Bar Infant Car Seat Adapter Instructions Attach Main BAR Attach Restraint Belt M/F and Arms Attach Restraint Belt M Buckle Belt Position ARM Prepare Stroller for Infant CAR Seat InstallationAttach Restraint Belt F Position Restraint Belt F Lower Seat Back Raise Handle Install Infant CAR SeatBritax Engage CAR Seat Fasten Restraint Belt Engage CAR Seat Peg PéregoRaise Seat Back Position Handle Position CAR Seat Tighten Restraint Belt Graco Remove Accessory BARRaise Seat Back Position Handle Britax Peg Pérego To Remove CAR SeatSET Parking Brake Remove CAR Seat Graco Engage Tray Tray InstallationRemove Screws Remove Accessory BAR Rotate Tray Remove Sharp Screw and Belt Remove Restraint Belt MRemove Restraint Belt F Replace Sharp Screw Infant Car Seat Adapter Warnings Limited Warranty Warranty claims must be made through an authorized dealer