INSTALL INFANT CAR SEAT
When installing car seat in the ICSA for the first time, test fit with
the car seat unoccupied to ensure you understand the process. Warning Installing occupied Infant Car Seat on ICSA for first time may result
in accident, serious injury or death.
Britax® Go To | Peg Pérego® Go To | Graco® Go To |
Britax®
LOWER SEAT BACK
Lower seat back 7” to 8”. See “Reclining Seat” section of your stroller owner’s manual.
RAISE HANDLE | POSITION |
| CAR SEAT |
Place car seat “rear facing” onto ICSA accessory bar, in a straight
downward motion.
Move car seat handle into upright carrying position.
ENGAGE CAR SEAT | FASTEN RESTRAINT BELT | TIGHTEN RESTRAINT BELT |
Slide grooves on underside of car seat onto ICSA accessory bar.
Fasten restraint belt over top of infant car seat as shown.
DOUBLE CHECK CAR SEAT IS SECURELY ATTACHED
Pull car seat upward without | Warning |
removing restraint belt. | |
You should not be able to | Failure to securely attach |
remove car seat without | car seat may result in |
unfastening restraint belt. | serious injury or death. |
Pull on red ring to tighten.
Warning
Be sure restraint belt tension is not constricting child as it may cause serious injury.
TO REMOVE Britax®
Go To 
OMA09D | P5 |
