TRAY INSTALLATION
Children should not be placed directly in the BOB Stroller seat with the ICSA installed, unless tray is installed for safety and protection.
REMOVE SCREWS
REMOVE ACCESSORY BAR
Using a Phillips screwdriver, remove both screws.
TIP: Attach short screws to accessory bar for future use.
CAUTION: Ends of accessory bar are sharp!
ENGAGE TRAY
Hook tray onto main bar.
Using a Phillips screwdriver, remove long screws from tray.
ROTATE TRAY
Rotate tray towards stroller seat until it rests on main bar.
SECURE TRAY
Insert long screw through each hole in tray, main bar and into nut on underside of tray.
Tighten firmly with Phillips screwdriver.
Line up holes.
OMA09D | P9 |
