EtherFast® 10/100 LAN Cards

10.In Network Neighborhood you can only see computers running the same operating system as your computer (i.e., your PC is running Windows 95 and it can only see other Windows 95 computers and not any computer running Windows 98).

Choose Start, Find, Computer and type the name of the computer in the window that comes up and click Find Now.

Now make sure that the you are using the same protocol(s) and work- group name on the 95 and 98 computers. To do this, click Start, Settings, Control Panel on two computers running different Windows operating systems. Click on the Network icon, choose the Configuration tab, then click on the Identification tab for Workgroup name. Compare the protocols on both computers and make sure that they are the same. If any protocols are missing, refer to page 60 to install any needed protocol(s).

If all computers are using the same protocol(s) and Workgroup name, and Windows 95 computers can't see Windows 98 computers, enable NetBIOS on all the computers using Windows 95 and 98. Follow these instructions:

The IPX/SPX-compatible protocol should be installed on all Windows computers (see page 60 if you need to add this protocol). Bring up the properties of the IPX/SPX-compatible protocol by clicking on Start, Settings, Control Panel, then double-click the Network icon. Choose the Configuration tab and highlight IPX/SPX-compatible Protocol. Click on Properties. Now, to install NetBIOS, click on the NetBIOS tab. Put a check next to I want to enable NetBIOS over IPX/SPX. Click OK, then OK again. Windows will copy the appropriate files to your computer. When asked to restart your PC, remove any floppy disks and click OK. Be sure to do this on all of your computers that are having trouble seeing your entire network.

11.The workgroup, protocols, cabling and driver are all working properly, but the PC uses an AMD processor and it can only see itself in network neighborhood.

In some instances with PCs using AMD processors, the IRQ assigned to the card by the BIOS (as it gets listed on the bootup screens of most PCs) doesn't correspond to the IRQ assigned by Windows. This can be fixed by disabling the IRQ holder for PCI Steering in the Windows Device Manager. Refer to your PC's documentation for instructions or you can follow the suggested instructions below. Keep in mind that this procedure will vary depending on your computer’s configuration.

Click on Start, Settings, Control Panel, then double click the System icon. Click on the Device Manager tab. Open System Devices, then open PCI Bus.

47

Page 50
Image 50
Boca Research manual EtherFast 10/100 LAN Cards

10/100 specifications

Boca Research is a recognized name in the field of networking hardware, particularly known for its role in the proliferation of 10/100 networking technology during the late 1990s and early 2000s. The Boca Research 10/100 series of network interface cards (NICs) and hubs represented a significant advancement, facilitating faster data transmission speeds for personal and professional computing environments.

One of the standout features of Boca Research's 10/100 technology is its dual-speed capability, supporting both 10 Mbps and 100 Mbps Ethernet standards. This flexibility allowed users to easily upgrade their networks without the need for complete overhauls of existing infrastructure. The ability to switch between speeds ensured that users could benefit from increased bandwidth as their needs grew, all while maintaining compatibility with older 10Mbps devices.

The Boca Research 10/100 NICs were designed with Plug and Play support, enabling seamless installation and configuration on a range of operating systems. This user-friendly approach helped demystify networking for non-technical users, as the cards often automatically detected the network settings and optimized performance without requiring extensive manual configuration.

One of the key technologies behind the Boca Research 10/100 products was the implementation of the IEEE 802.3u standard, which defined the Fast Ethernet specifications. This compliance ensured not only compatibility with a wide array of networking equipment but also adherence to industry standards that promised reliable performance and stability.

In addition to speed and user-friendliness, Boca Research's 10/100 solutions also incorporated advanced features such as auto-negotiation, which allowed devices to automatically detect and align their operating speeds for optimal communication. This capability significantly reduced network bottlenecks and improved overall efficiency.

Moreover, Boca Research was committed to providing robust support and firmware updates, extending the lifespan of their products and ensuring that users benefited from the latest advances in networking technology. Their dedication to performance, combined with an accessible user experience, made the Boca Research 10/100 series popular among both home users and businesses seeking to modernize their networking setups.

Overall, the Boca Research 10/100 series was instrumental in shaping the landscape of Ethernet networking, offering versatile and efficient solutions that catered to the evolving demands of the digital age. Through a combination of cutting-edge technology, user-centric design, and ongoing support, Boca Research left an indelible mark on the industry, paving the way for future advancements in network connectivity.