EtherFast® 10/100 LAN Cards

About Plug-and-Play PCI Technology

The EtherFast 10/100 LAN Card is designed to run in a 32-bit desktop com- puter equipped with PCI expansion slots. The card is built to the PCI 2.1 standard.

Short for Peripheral Components Interconnect, PCI is a technology that allows special Plug-and-Play expansion cards to be automatically configured by a computer’s BIOS (Basic Input/Output System) once they have been installed. (Refer to your computer’s user guide for more information about its BIOS.)

When a PCI card is used in a computer that supports Plug-and-Play, the card is automatically configured each time the computer is booted. The card's IRQ, I/O address, and other operating parameters are automatically assigned.

There is no easy way to change a Plug-and-Play card's IRQ and other settings outside of the BIOS menu(s) that your computer provides. If the resources that are assigned to your EtherFast card seem to conflict with other devices in your computer, you will need to use your system's BIOS to resolve the con- flicts. If you have problems configuring your BIOS or resolving IRQ or other hardware conflicts, consult your computer’s manual or contact your PC's manufacturer for BIOS setup and configuration directions.

Here are some general guidelines to follow when installing a PCI card (such as the EtherFast card) into your computer:

1.The EtherFast LAN adapter should be used in a 32-bit PCI slot that sup- ports PCI Bus Mastering. It cannot be plugged into a PCI Bus Slave slot. Consult your motherboard's documentation for more information on master and slave slots.

2.If loading the EMM386.EXE program in your PC's CONFIG.SYS, you must use version MS-DOS 6.22 or above. If you load an older EMM386.EXE program (below DOS 6.22), your PC will hang up while loading the network driver.

3.When using NT, set your system’s PNP OS option in the BIOS settings to MANUAL or DISABLE. NT is not a Plug-and-Play OS, and will not usu- ally recognize LAN cards if they are set to be automatically detected and configured. If you need to configure your PC's BIOS in order to resolve an IRQ or other conflict with the EtherFast card, there are a few possibilities:

65

Page 68
Image 68
Boca Research 10/100 manual About Plug-and-Play PCI Technology

10/100 specifications

Boca Research is a recognized name in the field of networking hardware, particularly known for its role in the proliferation of 10/100 networking technology during the late 1990s and early 2000s. The Boca Research 10/100 series of network interface cards (NICs) and hubs represented a significant advancement, facilitating faster data transmission speeds for personal and professional computing environments.

One of the standout features of Boca Research's 10/100 technology is its dual-speed capability, supporting both 10 Mbps and 100 Mbps Ethernet standards. This flexibility allowed users to easily upgrade their networks without the need for complete overhauls of existing infrastructure. The ability to switch between speeds ensured that users could benefit from increased bandwidth as their needs grew, all while maintaining compatibility with older 10Mbps devices.

The Boca Research 10/100 NICs were designed with Plug and Play support, enabling seamless installation and configuration on a range of operating systems. This user-friendly approach helped demystify networking for non-technical users, as the cards often automatically detected the network settings and optimized performance without requiring extensive manual configuration.

One of the key technologies behind the Boca Research 10/100 products was the implementation of the IEEE 802.3u standard, which defined the Fast Ethernet specifications. This compliance ensured not only compatibility with a wide array of networking equipment but also adherence to industry standards that promised reliable performance and stability.

In addition to speed and user-friendliness, Boca Research's 10/100 solutions also incorporated advanced features such as auto-negotiation, which allowed devices to automatically detect and align their operating speeds for optimal communication. This capability significantly reduced network bottlenecks and improved overall efficiency.

Moreover, Boca Research was committed to providing robust support and firmware updates, extending the lifespan of their products and ensuring that users benefited from the latest advances in networking technology. Their dedication to performance, combined with an accessible user experience, made the Boca Research 10/100 series popular among both home users and businesses seeking to modernize their networking setups.

Overall, the Boca Research 10/100 series was instrumental in shaping the landscape of Ethernet networking, offering versatile and efficient solutions that catered to the evolving demands of the digital age. Through a combination of cutting-edge technology, user-centric design, and ongoing support, Boca Research left an indelible mark on the industry, paving the way for future advancements in network connectivity.