EtherFast
®
10/100 LANCards
53
Novell NetWare 3.x Client Setup for Windows 98 or 95
The instructions below explain how to set up the regular Novell NetWare 3.x
client for use on a Windows 98 or 95 PC. If you are installing NetWare’s
Client32 software instead, follow the instructions on page 38.
1. Follow the Windows 95 setup instructions or the Windows 98 setup
instructions.
2. Start up Windows 95 or 98. Click on Start, Settings, then Control Panel.
Double-click on Network. The Network window appears. Click on the
Configuration tab.
3. In the Primary Logon Box, choose Client for NetWare Networks.
4. Under the The following network components are installedbox, highlight
Client for NetWare Networksand click on the Properties button.
5. The Client for NetWare Networks Propertieswindow appears. Under the
General tab, enter the name of your network’s Preferred Server. Assign the
First Network Drive Letter; the default is F. Make sure the Enable logon
script processing is checked.
6. Click OK. Click on the Access Controltab. Make sure the Share-level
access controloption is selected; do not select User-level access control.
7. When you’re done, click OKto restart your computer.
The NetWare portion of your Windows setup is complete.
LNE100TX v4 test doc.qxd 3/22/00 4:14 PM Page 53