Bodum 11076-16 manual Parts of the Kettle, Special Instructions, POWER-SUPPLY Cord, Safety CUT-OFF

CHAMBORD

While the appliance is in use, the mains plug must be accessible in case of an emergency. The manufacturer declines any liability for accidents caused by faulty or non- xisting earthing of the appliance.

–If the power point is unsuitable for accommodating the plug of your appliance, have the power point changed by a licensed electrician.

SAVE THESE INSTRUCTIONS

PARTS OF THE KETTLE

1Hinged lid

2 Scale filter

3 Water level gauge

4 Max water level indicator

5 Min water level indicator

6 Base unit

7 ON/OFF button

8 Temperature selection knob

9 Keep warm button

SPECIAL INSTRUCTIONS

POWER-SUPPLY CORD

–A short power-supply cord is to be provided to reduce risks resulting from becoming entangled in or tripping over a longer cord.

–Extension cords are available and may be used if care is exercised in their use.

–If an extension cord is used, the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance, if the appliance is of the grounded type, the extension cord should be grounding - type 3-wire cord. The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over.

SWITCHING OFF THE KETTLE MANUALLY

The ON/OFF button (7) can be used to switch the kettle off before the water has reached the required temperature.

SAFETY CUT-OFF

The kettle is protected against damage resulting from use with an insufficient volume of water. A safety cut-off will automatically disconnect the power supply if the heating element overheats. Should the kettle ever boil dry during operation, you must leave it to cool for 10 minutes before re-filling it with cold water. The safety cut-off will reset automatically once it has cooled.

4