Handlebar Assembly (Cont.)
3.Using the 5mm Allen wrench, securely tighten 3 of the short button head screws with washers on the bottom of each oval support post.
Note: Two of the washers are bent to match the shape of the side of the oval tube and 4 of the washers are bent to match the shape of the front and back ends of the oval tube. Make sure that you use the correct washer for each location.
Install Support Tube
Fastening Screws and
Bent Washers
Power Cord
The turn on switch, fuse and power connector are all located on the front right side of your treadmill. You can now plug in the power supply and then attach the safety key.
Power Cord
Attachment
10
