INTEGRUS Installation and User Instructions Connecting to an Integrus transmitter | en 11 |
|
|
3.2Connecting interpreters desks LBB 3222/04 via the CCS 400 system
An Integrus transmitter requires the LBB 3422/20 Integrus audio input and interpreters module to interface with the CCS 400 discussion and inter- pretation system. This module must be mounted in the transmitter housing (see the Integrus installation manual).
The CCS 400 system is connected to the Integrus audio input and interpreters module by means of a 25- pole
3.3Connecting other analogue conference systems
An Integrus transmitter requires the LBB 3422/20 Integrus audio input and interpreters module to interface with other analogue conference systems. This module must be mounted in the transmitter housing (see the Integrus installation manual).
The analogue conference systems are connected direct- ly to the Integrus audio input and interpreters module by means of a
It is also possible to connect a conference system directly to the Integrus audio cinch inputs of an Integrus transmitter. In that case the interface module is not necessary.
Note: Before connecting the CCS 400 analogue conference systems, the DIL switches on the Integrus audio input and interpreters module must be set to ‘Connection to other audio sources’.
For details of the required settings, see section 2.2.
Notes:
•Before connecting other analogue conference systems, the DIL switches on the Integrus audio input and inter- preters module must be set to ‘Connection to other audio sources’. For details of the required settings, see section 2.2.
•If galvanic separation is required, add Beyer type TR/BV3 audio transformers on the module’s PCB (see section 2.1).
Bosch Security Systems