MIC Series 550 Camera On-Screen Display (OSD) Menus (Pelco Protocol) | en 47
Bosch Security Systems, Inc. User Manual F.01U.239.454 | 3.0 | 2012.09
8.4 PTZ Setup (unlocked)The Pelco PTZ Setup Menu provides access to the PTZ settings such as tours, scan speed,
presets, limit stops, recording, and AutoPivot.
PTZ Setup Menu Choices:
Night Mode Switches from color to
monochrome.
ON: Sets Night Mode on.
OFF: Sets Night Mode off.
AUTO: Sets Night Mode to Auto set.
ON (Day/Night
models only)
Wiper CONTINUOUS: Wiper wipes
continuously until deactivated
manually or by the five-minute time-
out built in to the system.
INTERMITTENT: Wipes twice, then
turns off after 15 seconds.
ONE SHOT: Wipes five times, then
turns off.
WASH WIPE: Wiper washes and
wipes.
WDR Wide Dynamic Range ON or OFF
Menu Description Sub-menu / Description Default Setting
PTZ Setup
Exit...
* Edit Tour 1...
* Edit Tour 2...
* Tour 1 Period: 5 sec
* Tour 2 Period: 5 sec
* Scan Speed 30 deg/sec
Edit Presets...
* Limit Stops: OFF
* Recording: “A”
*Autopivot: ON
* = Factory Setting
Focus / Iris: Select
Menu Description Sub-menu / Description Default
Setting
Exit Exits the menu.?
Edit Tour 1 Accesses the Add / Remove
Scenes On Standard Tour 1
Menu.
Exit: Exits the menu.
Scene (1 - 5): Adds or removes
scenes from the Standard Tour.
Edit Tour 2 Accesses the Edit Custom
Tour Menu.
Exit: Exits the menu.
Scene (1 - 5): Adds or removes
scenes from the Custom Tour.
Tour 1 Period Changes the length of
waiting time between
presets.
Sliding scale: – (3 sec. to 10 min.) + 5 sec.
Tour 2 Period Changes the length of
waiting time between
presets.
Sliding scale: – (3 sec. to 10 min.) + 5 sec.