![](/images/new-backgrounds/1249036/249036123x1.webp)
62 en MIC Series 550 Camera
Keyboard | User Action | Description | |
Command |
|
| |
|
| Press and hold | Initiates recording based upon current Recording |
|
| (2 seconds) | setting (A or B) in the Setup Menu. Press ACK to end |
0 | - Pattern |
| recording. |
|
|
|
|
|
| Press | Initiates recording continuous playback based upon |
|
|
| current Recording setting (A or B) in the Setup Menu. |
|
|
|
|
|
| Press and hold | Initiate Recording A. Press ACK to end recording. |
1 | - Pattern | (2 seconds) |
|
|
|
|
|
|
| Press | Initiate Recording A continuous playback |
|
| Press and hold | Initiate Recording B. Press ACK to end recording. |
2 | - Pattern | (2 seconds) |
|
|
| Press | Initiate Recording B continuous playback |
3 | - Pattern | Press | Initiate the AutoDome standard preset tour (Tour 1) |
4 | - Pattern | Press | Initiate the AutoDome custom preset tour (Tour 2) |
1 | - Aux On / Aux Off | Press | Activates / deactivates selected wiper mode or Alarm |
|
|
| Output 1. |
2 | - Aux On / Aux Off | Press | Activates / deactivates alarm output 2 |
3 | - Aux On / Aux Off | Press | Activates / deactivates alarm output 3 |
4 | - Aux On / Aux Off | Press | Activates / deactivates alarm relay |
91 - Aux On | Press | Activate Zone Scan (display zone titles) | |
92 - Aux On | Press | Activate Zone Scan (display zone titles) |
A.3 | Preset Commands (Forward Vision Protocol) | ||
|
|
|
|
| Preset | Command | Description |
| Number |
|
|
| 1 | Auto Home Position | After a certain amount of |
|
|
| manual control, the camera moves to the home |
|
|
| position (Preset 1). When this function is turned off, |
|
|
| the camera remains stationary until the next user input. |
|
|
|
|
| 62 | Wash Wipe Position | If Wash Wipe is On, then, when the Wash auxiliary is |
|
|
| set, the camera returns to a preset Wash Position, |
|
|
| activates the washer relay in the PSU, and turns on the |
|
|
| wiper. When the auxiliary is off, the camera returns to |
|
|
| its prior position and turns off the wiper. If Wash Wipe |
|
|
| is Off, then, when the aux is activated, the camera |
|
|
| closes the washer relay and remains in its current |
|
|
| position. |
|
|
|
|
| 85 | On Screen menu | Displays the On Screen Menu. |
| 86 | Self Diagnosis | Runs rudimentary tests indicating any faults with the |
|
|
| unit. The test begins with the unit moving to a specified |
|
|
| test position and then checking for valid resolver |
|
|
| readings and reliable camera module communications. |
|
|
| Then, the pan and tilt drives and camera zoom are |
|
|
| tested. Finally, the wiper is activated. The results of |
|
|
| each test are displayed as completed. |
|
|
|
|
| 87 | Play Pattern One | Play Pattern 1 |
| 88 | Stop Pattern One | Stop Pattern |
| 89 | Record Pattern One | Record Pattern 1 |
| 90 | Play Pattern Two | Play Pattern 2 |
| 91 | Stop Pattern Two | Stop Pattern 2 |
| 92 | Record Pattern Two | Record Pattern 2 |
F.01U.239.454 3.0 2012.09 | User Manual | Bosch Security Systems, Inc. |