Compaq Infortrend manual Disabling Password, Reset Controller, Shutdown Controller

If a password has previously been set, the controller will ask for the old password first. If password has not yet been set, the controller will directly ask for the new password. The password can not be replaced unless a correct old password is provided.

Old Password

..

Press ▼ or ▲ to select a character, then press ENT to move to the next space. After entering all the characters (alphabetic or numeric), press ENT for two seconds to confirm. If the password is correct, or there is no preset password, it will ask for the new password. Enter the password again to confirm.

Re-Ent Password

..

Change Password Successful

Disabling Password

To disable or delete the password, press ENT on the fist flashing digit for two seconds when requested to enter a new password. The existing password will be deleted. No password checking will occur when entering the Main Menu from the Initial screen or making configuration.

Reset Controller

To reset the controller without powering off the system, Press ▼ or ▲ to “Reset Controller,” then press ENT. Press ENT again for two seconds to confirm. The controller will now reset.

Reset This

Controller ..

Reset This

Controller ?

Shutdown Controller

Before powering off the controller, unwritten data may still reside in cache memory. Use the “Shutdown Controller” function to flush the cache content. Press

▼or ▲ to “Shutdown Controller,” then press ENT. Press ENT again for two seconds to confirm.

Shutdown This

Controller ..

Shutdown This

Controller ?

5-35 Infortrend