Compaq Infortrend manual Viewing and Editing SCSI IDs - Host Channel

Viewing and Editing SCSI IDs - Host Channel

Choose a host channel, then press [ENTER]. Choose “View and Edit SCSI ID.” A list of existing ID(s) will be displayed on the screen. You may then choose to add or delete an existing ID.

Viewing and Editing SCSI IDs

Adding a SCSI ID (Primary/Secondary Controller ID)

In single controller mode, you should set the Secondary Controller’s ID to “NA”. In dual-controller mode, you need to set an ID for the Secondary controller on each of your drive channels.

Press [ENTER] on one of the existing IDs. Choose “Add Channel SCSI ID,” then choose to assign an ID for either the “Primary Controller” or "Secondary Controller." A list of SCSI IDs will appear. Choose a SCSI ID. DO NOT choose a SCSI ID used by another device on the same channel. The defaults are PID=8 and SID=9 (SCSI channel). In redundant mode, logical drives mapped to a primary ID will be managed by the primary controller, and vice versa.

Terminal Operation 7-26