Compaq Infortrend Password Validation Timeout, Controller Unique Identifier, Press Yes to confirm

Press Yes to confirm.

A prompt will notify you that the controller NVRAM data has been successfully restored from disks.

Password Validation Timeout

Choose “View and Edit Configuration parameters,” “Controller Parameters,” then press [ENTER]. Select “Password Validation Timeout,” and press [ENTER]. Choose to enable a validation timeout from one minute to always check. The always check timeout will disable any configuration change made without entering the correct password.

Controller Unique Identifier

Enter any hex number between “0” and “FFFFF” for the unique identifier. The value you enter MUST be different for each controller.

The Controller Unique Identifier is required for configuring every RAID controller. The controller automatically notifies users to enter a unique identifier when the first logical drive is created in a dual- controller system.

7-39 Infortrend