Compaq Infortrend Viewing and Editing Logical Drives and Drive Members, Deleting a Logical Drive

NOTE:

•The rebuild priority determines how much of controller resources is conducted when rebuilding a logical drive. The default setting of the rebuild priority is “LOW.” Rebuild will have smaller impact on host I/O access, but rebuild will take a longer time to complete. Changing the rebuild priority to a higher level you will have a faster rebuild, but will certainly increase the Host I/O response time. The default setting “LOW” is recommended.

5.9Viewing and Editing Logical Drives and Drive Members

Press ENT for two seconds to enter the Main Menu. Press ▼ or ▲ to select "View and Edit Logical Drives..,” then press ENT.

Press ▼ or ▲ to select the logical drive, then press ENT.

Press ▼ or ▲ to select “View SCSI Drives..", then press ENT .

Press ▼ or ▲ to scroll through the list of member drives.

Deleting a Logical Drive

Press ENT for two seconds to enter the Main Menu. Press ▼ or ▲ to select "View and Edit Logical Drives," then press ENT.

Press ▼ or ▲ to select a logical drive, then press ENT.

Press ▼ or ▲ to select “Delete Logical Drive," then press ENT .

Press ENT for two seconds to delete. The selected logical drive has now been deleted.

View and Edit Logical Drives ↕

LG0 RAID5 DRV=3 2012MB GD SB=1

View SCSI Drives

..

C=1 I=0 1010MB

LG=0 LN SEAGATE

View and Edit Logical Drives ↕

LG0 RAID5 DRV=3 2012MB GD SB=1

Delete Logical

Drive ..

LG=0
Not Defined	?

Front Panel Operation 5-16