Compaq Infortrend Parity Check, Disconnecting Support, Maximum Tag Count, Max Xfer Narrow Only?

current clock setting will be displayed on the LCD.

Press ENT for two seconds to change the setting.

Max Xfer Narrow

Only?

Parity Check

Press ▼ or ▲ to select a SCSI target, then press ENT.

Choose “Parity Check," then press ENT. The current clock setting will be displayed on the LCD.

Press ENT for two seconds to change the setting.

SCSI Target
CHL=1 ID=0	..

Parity Check

Enabled ..

Disable

Parity Checking?

Disconnecting Support

Press ▼ or ▲ to select a SCSI target, then press ENT.

Choose “Disconnect Support," then press ENT. The current clock setting will be displayed on the LCD.

Press ENT for two seconds to change the setting.

SCSI Target
CHL=1 ID=0	..

Disconnect Support Enabled

Disable Support

Disconnect ?

Maximum Tag Count

Press ▼ or ▲ to select a SCSI target, then press ENT.

Choose “Max Tag Count," then press ENT. The current clock setting will be displayed on the LCD.

Press ▼ or ▲ to change the setting, then press ENT for two seconds to change the setting.

SCSI Target
CHL=1 ID=0	..

Max Tag Count: Default( 32) ..

Tag Cur=32

Set to:Default ?

Front Panel Operation 5-32