Compaq Infortrend manual LCD Screen Messages, LCD Keypad Operation, 3.1.1, 3.1.2, 3.2.1, 3.2.2

3.1.1	Configuring RS-232C Connection via Front Panel	..................................2
3.1.2	Starting RS-232C Terminal Emulation	3
3.2 Out-of-Band via Ethernet		4
What Is the “Disk Reserved Space?”		4
Other Concerns		5
Web-Based Management		5
Requirements		5
3.2.1	Connecting Ethernet Port:	5
3.2.2	Configuring the Controller	6
3.2.3 NPC Onboard		9
The SNMP_TRAP section		10
The EMAIL section		10
The BROADCAST section		10

Chapter 4 LCD Screen Messages

4.1	The Initial Screen	1
4.2	Quick Installation Screen	1
4.3	Logical Drive Status	2
4.4	Logical Volume Status	3
4.5	SCSI Drive Status	4
4.6	SCSI Channel Status	5
4.7	Controller Voltage and Temperature	6
4.8	Cache Dirty Percentage	7
4.9	View and Edit Event Logs	7

Chapter 5 LCD Keypad Operation

5.1	Power on RAID Enclosure	1
5.2	Caching Parameters	1
	Optimization Modes	1
	Optimization Mode and Stripe Size	2
	Optimization for Random or Sequential I/O	3
	Write-Back/Write-Through Cache Enable/Disable	3
5.3	View Connected Drives:	5
5.4	Creating a Logical Drive	6
	Choosing a RAID Level:	6
	Choosing Member Drives:	6
	Logical Drive Preferences:	6
	Maximum Drive Capacity:	7
	Spare Drive Assignments:	7
	Disk Reserved Space:	7
	Write Policy:	7
	Initialization Mode:	7
	Stripe Size:	8
	Beginning Initialization	8
5.5	Creating a Logical Volume	10
	Initialization Mode	10
	Write Policy	10
5.6	Partitioning a Logical Drive/Logical Volume	12
5.7	Mapping a Logical Volume/Logical Drive to Host LUN	13
5.8	Assigning Spare Drive and Rebuild Settings	14
	Adding a Local Spare Drive	14
	Adding a Global Spare Drive	15
	Rebuild Settings	15

v