Compaq Infortrend manual System Functions, Mute Beeper, Change Password, Changing Password

5.13System Functions

Choose “System Functions” in the main menu, then press ENT. Press ▼ or ▲ to select a submenu, then press ENT.

Mute Beeper

When the controller’s beeper has been activated, choose “Mute beeper," then press ENT to turn the beeper off temporarily for the current event. The beeper will still activate on the next event.

Mute Beeper

..

Change Password

Use the controller’s password to protect the system from unauthorized entry. Once the controller’s password is set, regardless of whether the front panel, the RS-232C terminal interface or the RAIDWatch Manager is used, the user can only configure and monitor the RAID controller by providing the correct password.

IMPORTANT!

•The controller requests a password whenever user is entering the main menu from the initial screen or a configuration change is made. If the controller is going to be left unattended, the “Password Validation Timeout” should be set to “Always Check.”

•Controller password and controller name share a 16-character space. The maximum number of characters for controller password is 15. If 15 characters are used for a controller name, there will be only one character left for controller password and vice versa..

Changing Password

To set or change the controller password, press ▼ or ▲ to select “Change Password,” then press ENT.

Change Password

..

Front Panel Operation 5-34