Compaq Infortrend manual Event Messages, Event Index, Controller Event, Alert, Appendix

Appendix

D

Event Messages

The controller events can be categorized as follows:

Alert	Errors that need to attend to immediately
Warning	Errors
Notification	Command processed message sent from Firmware

The controller records all system events from power on, it can record up to 1,000 events. To power off or to reset the controller will cause an automatic deletion of all the recorded event logs.

RAIDWatch manager' sub-module,Event Monitor, can be used to record events on multiple controllers especially when controller reset or power-off is an expected action. The Event Monitor runs independently on a host computer and can store up to 1000 events (per controller unit) regardless of the controller's current status. The software program is Java-based and is usually bundled with RAIDWatch manager. Associated details can be found in the RAIDWatch user's manual.

Descriptions below may contain abbreviations. Abbreviations and Capitalized letters are preserved for the coherency with the event messages shown on LCD screen or terminal.

Event Index

Controller Event

Alert:

[0104] Controller ALERT: DRAM Parity Error Detected

[0105] Controller <primary/secondary> SDRAM ECC <multi-bits/single-bit> Error Detected

[0110] CHL:_ FATAL ERROR (_)

[0111] Controller ALERT: Redundant Controller Failure Detected

[0111] Controller NOTICE: Redundant Controller Firmware Updated

[0114] Controller ALERT: Power Supply Unstable or NVRAM Failed

Warning:

[0107] Memory Not Sufficient to Fully Support Current Config.

Event Messages D-1